Walk, Driveway & Automatic Gate Installation in Austin & Georgetown

Quick answer: We design and build new walk gates, driveway gates and automatic gates in Austin and Georgetown, planned together with the fence around them and built by our fully insured crews.

Typical gate project total (new walk or drive gate): $800–$5,400. Typical Sagamore project totals from recent Austin-area jobs (2024–2026), not quotes; your price comes from a free written estimate. See our fence cost guide.

Gates Designed and Built Around How You Use Your Property

A gate is the part of a fence you use every day, so it has to look right, swing or slide smoothly and latch every time. Whether you need a simple walk gate to the backyard, a double driveway gate or a fully automatic entry with access control, the gate should be planned with the fence, not added as an afterthought.

Sagamore Fence & Deck designs and builds gates for homes, ranches, HOAs and commercial properties across Austin, Georgetown and Central Texas from our base at 6550 FM 1105 in Georgetown. We know automatic gate components and technology inside and out, so we can design a complete system, from the gate itself to the operator, safety devices and access control.

Reviewed by Tony Perez, owner of Sagamore Fence & Deck.

Black iron fence and driveway gate between limestone columns with a stone mailbox column under a mature live oak, built by Sagamore Fence & Deck

Our Gate Services

We build gates in wood, iron and steel, chain link and wire panel to match the fence around them, as part of our full fence installation service or as a stand-alone project.

Black arched iron walk gate opening from a covered patio

Walk gates

Walk gates for side yards, backyards, pool areas and garden paths, built to match your fence and fitted with hinges and latches that suit how often the gate gets used.

Horizontal cedar double driveway gate on a black steel frame with a solar-powered gate operator

Driveway gates

Single and double swing gates and slide gates for driveways, ranch entrances and commercial lots. We typically build wood driveway gates on steel frames so they stay square over time.

Automatic horizontal cedar and steel cantilever slide gate across a concrete driveway

Automatic gates

Sagamore designs the system and manages the job. The gate specialists we’ve worked alongside for years install to our standards, so you get one team responsible for the gate and the operator. Adding an opener to a home driveway gate? See automatic gate operators. For businesses, RV parks and storage facilities, see automatic gates and access control.

Horizontal cedar walk gate with a keypad lock between cedar fence panels

Access control

Decide who gets in and how. We plan the access control along with the gate, so the keypad, remotes and other devices fit the way your home, community or business works.

Need the fence too? See our ornamental iron and steel fencing, wood fences and chain link fences, or compare every option on our fencing services page. For self-closing, self-latching pool gates, see pool fence installation.

Why a Well-Built Gate Matters

Black iron sliding gate with a gate operator across a gravel lot

A gate gets more wear than any other part of a fence. Building it right the first time saves you from sagging, dragging and latches that won’t catch.

Checkmark icon inside of a brown circle.

Security and privacy

A solid gate with the right latch or lock finishes off the fence line, so the whole perimeter does its job.

Checkmark icon inside of a brown circle.

Everyday convenience

An automatic driveway gate opens from your car, and a keypad lets family, guests and deliveries in without a key.

Checkmark icon inside of a brown circle.

Built to stay square

Steel frames, strong posts and the right hinges keep gates from sagging and dragging over time.

Checkmark icon inside of a brown circle.

Safety around pools and kids

Self-closing, self-latching gates help keep pool areas and yards closed when they should be.

Checkmark icon inside of a brown circle.

A finished look

A gate designed with the fence matches its style, height and material, from cedar to iron.

the sagamore way

Sagamore Fence & Deck: Gates Designed as a Complete System

From a backyard walk gate to an automatic entry for a community, we plan the gate, hardware and access together, then manage the job from start to finish.

We design the system

We size the gate, choose the frame and hardware and specify the operator and access control so every part works together.

Installed to our standards

The gate specialists we've worked alongside for years install to our standards.

Built for local conditions

We set gate posts for Central Texas clay and limestone so heavy gates stay put.

Hardware that fits the use

Hinges, latches, drop rods and locks are chosen for the gate's size, weight and how often it opens.

Clear, written estimates

You get a written estimate that spells out the gate, hardware, operator and access control before any work starts.

Gates Built for Your Property

The right gate depends on the opening, the slope of the driveway, the fence around it and how you want to use it.

Swing or slide

• Swing gates

A good fit when there’s room for the gate to open and the driveway is fairly level.

• Slide gates

Cantilever and track gates save space and work well on tight or sloped driveways.

Homes, Ranches, HOAs and Businesses

We build gates for backyards and driveways, ranch entrances, HOA common areas and amenities, and commercial and municipal properties.

Matched to your fence

Cedar, iron, steel, chain link or wire panel, built to the same style and height as the fence around it.

Gate Installation in Austin

We build walk gates, driveway gates and automatic gates for Austin homes, from a single cedar walk gate to a wide double drive gate.

  • Built to stay square. We typically build wood and cedar driveway gates on steel frames and hang them on strong posts, so they don't sag and drag.
  • Swing or slide. A swing gate needs room to open and a fairly level drive. Tight, sloped or wide openings often call for a slide gate. Read swing vs slide gate.
  • Austin rules. In Austin, a solid fence on a corner lot needs city review so it doesn't block drivers' view, and a residential fence over 6 feet along a public street needs a permit. See our Texas fence laws and permits guide.

Our recent Austin-area gate projects typically ran $800–$5,400. A single wood or iron walk gate sits at the low end. Wide double drive gates, custom iron and automatic gate operators cost more. See fence and gate work in Austin.

Call (512) 337-3714 (Mon–Fri, 8:00 AM–4:30 PM) or request a free estimate.

Gate Installation FAQs

Do you install automatic gates?

Yes. Sagamore designs the system and manages the job, including the gate, the operator, safety devices and access control. The gate specialists we’ve worked alongside for years install to our standards. We also add automatic openers to existing driveway gates. See automatic gate operators.

A swing gate works well when there’s room for it to open and the driveway is fairly level. A slide gate, either cantilever or on a track, is often the better choice for tight spaces, sloped driveways or wide openings. We look at your opening and recommend the option that fits.

We can plan keypads, keypad locks, remotes and other entry devices, along with free-exit options so vehicles can leave without a code. We design the access control with the gate, so it fits the way your home, community or business works.

Yes, when it’s built right. We typically build wood and cedar driveway gates on steel frames and hang them on strong posts with the right hinges, which helps them stay square instead of sagging and dragging.

Usually, yes. We build gates in wood, iron and steel, chain link and wire panel, and we match the style and height of the fence around them as closely as the materials allow.

Our recent Austin-area gate projects typically ran $800–$5,400. It depends on the width of the opening, the material, whether it swings or slides and whether you add an operator and access control. We give you a written estimate after looking at your property, and our instant quote tool can give you a ballpark first.

Financing is available for qualifying projects through Wisetack, subject to credit approval. Rates and terms depend on your credit, and you can prequalify when you get your estimate. Want a ballpark first? Try our instant quote tool.

5.0 from 317 Google reviews (as of Nov 11, 2026)

What Central Texas homeowners say about Sagamore Fence & Deck

“We were happy with the Trex deck installation and fence repair that Sagamore did for us. The crew was efficient and the deck came out looking great!”
Po M. · Google review · November 2026
“Amazing communication, amazing crew - and wonderful work. I enjoyed this experience so much!”
Jeremy S. · Google review · October 2026
“Communication is clear, they are prompt, caring, superior work and cleanup is excellent. Definitely recommend them for your fence project!”
Tania A. · Google review · October 2026

Read all reviews on Google

Beautiful artistry. Timeless Craftsmanship. We’re Sagamore Fence & Deck.

Sagamore Fence & Deck logo – fencing and decking services in Central Texas.